Belt clip, Front cover – Motorola T5200 User Manual

Page 3

Advertising
background image

Belt Clip

Motorola T5100 and T5200 radios come with a swivel belt clip.

To Attach:

1. Align belt clip post with hole in the radio back.

2. Gently push until it clicks into place. Fig. 3.

Figure 3

Figure 4

Front Cover

The T5100 and T5200 radios have a removable front cover

that allows you to customize your radio to your lifestyle. Do

not operate the radio without the cover.

To Remove:

1. Press down on the tab at the bottom of the radio with your

fingernail or a small coin. Fig. 4.

2. Pull the bottom of the removable cover away from the radio.

4

To Remove:

1. Push release tab on top of belt clip down to release catch.

2. Pull belt clip from the radio back.

To Attach:

1. Reinsert housing tab.

2. Press down to snap cover into place.

Advertising
This manual is related to the following products: