Meyer V- MAX 3954 - Manual (Page 46)

Model V-Max —46—
(08 SERIAL # AND LATER)
918-0309 PTO DRIVE SHAFT ASSEMBLY
1000 RPM-1-3/8”, 21 SPLINE SP (STANDARD)
918-0311 PTO DRIVE SHAFT ASSEMBLY
1000 RPM 1-3/4”, 20 SPLINE (OPTIONAL)
WWE2480 (80 DEGREE C.V.)
NOTE: PTO IS 4” SHORTER (1-3/4x20) 6” SHORTER
(1-3/8x21) THAN STANDARD 540 OR 1000 RPM PTO
KEY MEYER PART
NO. DESCRIPTION
1 918-0208-1-1 Yoke 1-3/8"-21 Splined As-
sembly-Standard
918-0210-1-1 Yoke 1-3/4"-20 Splined As-
sembly-Optional
2 918-0208-1-2 Grease Zerk in item 3
3 918-0208-1-3 Double Yoke
4 918-0308-1-1 Inboard Yoke
5 918-0208-1-5 Cross and Bearing Kit
6 918-0208-1-6 Spring Pin 10 x 80
7 918-0208-2-1 Cross and Bearing Kit
8 918-0309-1-2 Profile and Sleeve Welded
As. 4" Shorter
9 918-0309-2-2 Overrunning Clutch & S4LGA
Profile Assy. 4" Shorter
10 918-0208-2-3-1 Clamping Cone Bolt (Included
in Item 11)
11 918-0308-2-2 Cut Out Clutch 2200NM
12 918-0208-2-4 Bearing Ring SC25
13 918-0309-2-3 Outer Shield Tube OVL 4"
Shorter
14 918-0309-1-1 Inner shield Tube Round 4"
Shorter
15 918-0308-1-3 CV Cone & Bearing Assy.
16 918-0308-1-4 Shield Cone 3 Rib
17 918-0308-2-5 Shield Cone 8 Rib
18 918-0208-2-7 Safety Chain
KEY MEYER PART
NO. DESCRIPTION
19 918-0208-2-8 Decal Out-In Item 13
20 918-0208-1-10 Decal In-In Item 8
21 918-0208-2-9 Screw-In Item 15,16 & 17
22 918-0208-1-11 Support Bearing
23 918-0208-1-12 Zerk-In Item 8
24 918-0208-1-13 Cross and Bearing Kit
25 918-0208-2-10 Decal-K64
26 918-0309-1 1-3/8-21 (Std) Spline Tractor
1/2 Assembly-6" Shorter -Star
Profile
918-0311-1 1-3/4-20 (Optional) Spline
Tractor 1/2 Assembly-4"
Shorter-Star Profile
27 918-0309-2 1000 RPM Cutout Clutch Im-
plement 1/2 Assy. 4"
Shorter-Star Profile, 1-3/4x20
918-0309-2-S 1000 RPM Cutout Clutch Im-
plement 1/2 Assy. 6"
Shorter-Star Profile, 1-3/8x21
28 918-0208-1-1-1 AS-Lock Kit For Item 1 (Inc.
Ring, Collar & Balls) 1-3/8 21
Spline
918-0210-1-1-1 AS-Lock Kit For Item 1 (Inc.
Ring, Collar & Balls) 1-3/4 20
Spline
29 918-0308-2-6 Lubrication Decal
See page 47 for over running clutch.