Combination switch, Graphic, 1 low beam (exterior lamp switch position – Mercedes-Benz 2000 SL-Class User Manual
Page 90: 2 high beam (exterior lamp switch position, 4 turn signals, right, 5 turn signals, left, Turn signal failure, P54.25-2213-26
86
Combination switch
Technical
data
Instruments
and controls
Operation
Driving
Instrument
cluster display
Practical hints
Car care
Index
Combination switch
1
Low beam (exterior lamp switch position
B)
2
High beam (exterior lamp switch position
B)
3
High beam flasher (high beam available
independent of exterior lamp switch position)
4
Turn signals, right
5
Turn signals, left
To signal minor directional changes, such as changing
lanes on a highway, move combination switch to the
point of resistance only and hold it there.
To operate the turn signals continuously, move the
combination switch past the point of resistance (up or
down). The switch is automatically canceled when the
steering wheel is turned to a large enough degree.
Turn signal failure
If one of the turn signal lamps fails, the turn signal
indicator system flashes and sounds at a faster than
normal rate.