Mercedes-Benz 2003 S 500 - Manual (Page 156)

156
Controls in detail
Control system
Setting key dependency
Use this function to set whether the mem-
ory settings for the seats, the steering
wheel, the mirrors, and the automatic cli-
mate control should be stored separately
for each SmartKey (
୴ page 117).
̈ Move the selection marker with
the æ or ç button to
the
CONVENIENCE submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
SETTINGS KEY-DEPENDENT .
The selection marker is on the current
setting.
̈ Press æ or ç to set key depen-
dency to
ON or OFF .
Activating easy-entry/exit feature
Use this function to activate and deacti-
vate the easy-entry/exit feature. When the
feature is activated, the steering wheel and
driver’s seat will move back to facilitate ex-
iting when you:
ț remove the SmartKey from the starter
switch
ț open the driver’s door
However, the engine must be turned off.
Warning!
G
You must make sure that no one can be-
come trapped or injured by the moving
steering wheel and the driver’s seat when
the easy-entry/exit feature is in operation
and the driver’s door is being opened or the
SmartKey is removed from the starter
switch.
Do not leave children unattended in the ve-
hicle, or with access to an unlocked vehicle.
Unsupervised use of vehicle equipment may
cause an accident and/or serious personal
injury.
Do not leave children unattended in the ve-
hicle, or with access to an unlocked vehicle.
Children could open the driver’s door and
unintentionally activate the easy-entry/exit
feature, which could result in an accident
and/or serious personal injury.