Mercedes-Benz 2003 S 500 - Manual (Page 33)

33
Getting started
Unlocking
1 KEYLESS-GO start/stop button
Before you press the KEYLESS-GO
start/stop button, the vehicle’s on-board
electronics have status 0 (as with
SmartKey removed).
Make sure the gear selector lever is set
to P.
Do not depress the brake pedal.
Position 1
̈ Press the KEYLESS-GO start/stop but-
ton once.
This supplies power to some electrical
consumers, such as seat adjustment.
Ignition (or position 2)
̈ Press the KEYLESS-GO start/stop but-
ton twice in immediate succession.
This supplies power to all electrical
consumers. All the lights in the instru-
ment cluster light up.
More information can be found in the
“Controls in detail” section (
୴ page 85).
For information on starting the engine us-
ing the KEYLESS-GO start/stop button,
see “Starting with KEYLESS-GO*”
(
୴ page 43).
i
If you now press the KEYLESS-GO
start/stop button twice, the power
supply is again switched off.
i
If you now press the KEYLESS-GO
start/stop button once, the power sup-
ply is again switched off.