Testing your internet connection, Configuring tcp/ip for windows xp, Configuring tcp/ip for windows vista – Motorola SURFboard SBG6580 Series User Manual

Page 18: X96088_heading2_con

Advertising
background image

B

Connecting to the Internet •

Motorola SURFboard • User Guide

10

Testing Your Internet Connection

After changing the default passwords, you are ready to connect to the Internet.

1.

Open a browser window.

2.

Type in www.motorola.com.

If you are able to see the Motorola website, you are ready to enjoy the Internet. If you cannot
connect to the Internet you may need to configure your modem. See the

Configuring TCP/IP

sections for additional information.

Configuring TCP/IP for Windows XP

1.

Click Start and then click Settings.

2.

Click Control Panel.

3.

Double-click Network Connections to list the Dial-up and LAN or High-Speed

Internet connections.

4.

Right-click the network connection for your network interface.

5.

Select Properties from the pull-down menu to display the Local Area Connection

Properties window. Verify that Internet Protocol (TCP/IP) is checked.

6.

Select Internet Protocol (TCP/IP) and click Properties to display the Internet

Protocol (TCP/IP) Properties window.

7.

Select Obtain an IP address automatically and Obtain DNS server address automatically.

8.

Click OK to save the TCP/IP settings and exit the TCP/IP Properties window. Close

the Local Area Connection Properties window and then exit the Control Panel.

9.

Open a new browser window and type in

www.motorola.com

. Skip the next step

if you can connect to the Motorola website.

10.

Renew the IP Address if you cannot connect to the Internet. (See

Renewing the

IP Address in Windows XP, Vista, or 7

).

Configuring TCP/IP for Windows Vista

1.

Click Start, Settings, and Control Panel.

2.

Double-click Network and Internet to display the Network and Internet window.

3.

Double-click Network and Sharing Center to display the Network and Sharing

Center window.

4.

Click Manage network connections and right-click the network connection for

your network interface.

5.

Select Properties to display the Local Area Connection Properties window.

Click Continue if you see

User Account Control -- Windows needs your

permission to continue

prompt.

Advertising