1 mode switches, 2 connections to the controller, 3 other connections and peripherals – Mitsumi electronic Mac E1070 User Manual
Page 11: Mode, Installation
Installation
Mitsubishi Electric, MA00776
2-3
2.2.1 Mode Switches
All mode switches must be in OFF position during operator terminal use.
The mode switches should not be touched unless by qualified personell.
2.2.2 Connections to the Controller
For information about the cables to be used when connecting the operator terminal
to the controller, please refer to the help file for the driver in question.
2.2.3 Other Connections and Peripherals
Cables, peripheral equipment and accessories must be suitable for the application
and its environment. For further details or recommendations, please refer to the
supplier.
Caution
When using a compact flash card, do not remove the card when the busy indicator is
illuminated.
1
24V
DC
CF
CARD
CO
M
1
RS422
RS485
CO
M
2
RS232
10/100
EXP
ANSION
BUSY
MODE
1234
ON
DIP
MODE
1234
ON
DIP