Mitsumi electronic Mac E1070 - Manual (Page 3)

Foreword
Mitsubishi Electric, MA00776
Installation manual for the E1000 series operator terminals
Foreword
The E1000 operator terminal is developed to satisfy the demands of human-
machine communication. Built-in functions such as displaying and controlling
text, dynamic indication, time channels, alarm and recipe handling are
included.
The operator terminal work, for the most part, in an object-oriented way,
making it easy to understand and use. The configuration operation of the
terminal is made in a personal computer, using the configuration tool E-
Designer. The project is then transferred and stored in the operator terminal.
The operator terminal can be connected to many types of automation
equipment, such as PLCs, servos or drives. In this manual the expression “the
controller“ is used as a general term for the connected equipment.
This manual explains how to install the operator terminal. Please refer to the
reference manual for further information.

Mitsubishi Electric AB, MA00776, 2005-01
The information in this document is subject to change without notice and is provided as available at the time
of printing. The manufacturer reserves the right to change any information without updating this publication.
The manufacturer assumes no responsibility for any errors that may appear in this document.
Read the entire installation manual prior to installing and using this equipment.
Only qualified personnel may install, operate or repair this equipment. The manufacturer is not responsible
for modified, altered or renovated equipment.
Because the equipment has a wide range of applications, users must acquire the appropriate knowledge to use
the equipment properly in their specific applications.
Persons responsible for the application and the equipment must themselves ensure that each application is in
compliance with all relevant requirements, standards and legislation in respect to configuration and safety.
Only parts and accessories manufactured according to specifications set by The manufacturer may be used.
THE MANUFACTURER SHALL NOT BE LIABLE TO ANYONE FOR ANY DIRECT, INDIRECT,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
INSTALLATION, USE OR REPAIR OF THIS EQUIPMENT, WHETHER ARISING IN TORT,
CONTRACT, OR OTHERWISE. BUYER’S SOLE REMEDY SHALL BE THE REPAIR,
REPLACEMENT, OR REFUND OF PURCHASE PRICE, AND THE CHOICE OF THE APPLICABLE
REMEDY SHALL BE AT THE SOLE DISCRETION OF THE MANUFACTURER.