Midland Radio SP-410 - Manual (Page 5)

SP-400 Series User’s Guide
Disclaimer
Midland Radio Corporation is committed to continuous quality
improvements, for this reason specifications may change without
prior notice.
Every effort has been made to ensure that the information in this
document is complete, accurate, and up-to-date. Midland
assumes no responsibility for the results of errors beyond its
control. The manufacturer of this equipment also cannot
guarantee that changes in the equipment made by unauthorized
people will not affect the transceiver’s performance or functions.
Safety
Your SP-400 series portable transceiver has been carefully
designed to give you years of safe, reliable performance. As with
all electrical equipment, however, there are a few basic
precautions you should take to avoid injury to yourself or
damage to the radio:

Read the instructions in this handbook carefully. Be
sure to save it for future reference.

Read and follow all warning and instruction labels
on the radio itself.

Do not carry the transceiver by the antenna. This
may damage the antenna or antenna terminal. Grasp it
by its base (not the tip!) when you need to attach or
remove the antenna.

Do not hold the radio with the antenna very close to,
or touching the body, while transmitting. The radio
will perform best if the microphone is 2-4 inches away
from the mouth and the radio is vertical.

Be sure the PTT button is not pressed when you do
not need to transmit.
© 2005, Midland Radio Corporation
5