Cleaning the interior 26, Appliance door 26, Ventilation slits 26 – Miele KWT1611SF User Manual

Page 26: Door seals 26, Cleaning and care, Before cleaning, Cleaning the interior, Appliance door, Ventilation slits, Door seals

Advertising
background image

Before cleaning

^ Use the main switch to turn the

appliance off completely.

The main switch is located on the right
side underneath the control panel.

^ Unplug the power cord.
^ Remove any bottles from the

appliance and store it in a cool place.

^ Take out any removable parts,

e.g., shelves.

Cleaning the interior

^ It is recommended to clean the

interior once a month.

^ Use a mild solution of warm water

and liquid dish soap.

^ Clean the wooden racks with a damp

cloth. Do not allow the racks to
become too wet.

^ After washing, wipe down the interior

and accessories with a clean wet
cloth, then dry with a soft cloth.
Leave the appliance doors open for a
short time, so the moisture can
evaporate.

Appliance door

^ Stainless steel surfaces can be

cleaned using a non-abrasive
stainless steel cleaner.

^ To help prevent resoiling, a

conditioner for stainless steel can
also be used. Apply sparingly with
even pressure.

Ventilation slits

^ Check the ventilation slits regularly.

Remove any dirt/dust with a vacuum
cleaner or brush. Clean as needed.

Door seals

Do not use any oils or grease on the
door seals as these will cause the
seals to deteriorate and become
porous over time.

^ Clean the door seal with water only

and dry thoroughly.

Cleaning and care

26

Advertising
This manual is related to the following products: