Miller Electric Big Blue 401DX CC - Manual

Specifications
(Subject to change without notice.)
Engine Specifications
(Subject to change without notice.)
Processes
DC Stick (DC SMAW)
Air Carbon Arc (CAC-A)
Cutting and Gouging
thru 6 mm (1/4 in)
DC TIG (GTAW)
Flux Cored (FCAW)
Rated Output at 40˚C (104˚F) 400 A at 30 VDC, 40% Duty Cycle
300 A at 32 VDC, 100% Duty Cycle
DC Amperage Range 40 – 400 A
Generator Power 3 kVA, 120/240 VAC, 26/13 A, 50/60 Hz while welding
Weight Net: 670 kg (1475 lb) Ship: 685 kg (1510 lb)
Industrial Applications
Structural Work
Mining
Maintenance and Repair
Piping
Quick
Specs
Big Blue
®
401DX
Engine Driven
Welding Generator
Issued May 2008 • Index No. EX/5.2
The Power of Blue ® .
Miller Electric Mfg. Co.
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Web Site
www.MillerWelds.com
International Headquarters
Phone: 920-735-4505
USA FAX: 920-735-4134
Canadian FAX: 920-735-4169
International FAX: 920-735-4125
3-phase, 4-pole revolving field
technology provides efficient welding
current with less horsepower than DC
generator technology — less horsepower
per welding amp saves fuel — as much
as 20 to 30 percent. Easily connects in
parallel with no special kits for heavy
gouging or stud welding applications.
Five welding ranges provide
overlapping ranges and fine current
control in each range for easy set-up
and control of welding amperage.
The F3L2011, 3-cylinder Deutz diesel
engine provides 30 HP at 1850 RPM.
Single side service. Direct fuel injection
for fuel economy and easy starts. Air/oil
double-cooled diesel for maximum
reliability in all environments.
Compact and lightweight, this low-
speed diesel measures in at 625 x
927 x 1422 mm (24-5/8 x 36-1/2 x
56 in).
Remote control facility allows
precise adjustment of amperage
without walking back to the machine.
3 kW/kVA auxiliary power while
welding is available from one
120 VAC duplex receptacle and one
240 VAC duplex receptacle that are
circuit breaker protected.
Note: Parts and labor warranted for three years.
Engine warranted by Deutz for three years.
Rugged controls with no printed
circuit boards.
Weld Output
Range
40 – 400 A
Weld
Mode
CC/DC
Max. Open-Circuit
Voltage
95 (90)
Weld Output Rated at
40˚C (104˚F)
400 A, 30 VDC, 40% Duty Cycle
300 A, 32 VDC, 100% Duty Cycle*
Generator Power Output
Rated at 40˚C (104˚F)
3 kVA, 120/240 VAC,
26/13 A, 50/60 Hz while
welding
Weight (without fuel)***
Net: 670 kg (1475 lb)
Ship: 685 kg (1510 lb)
Dimensions
H: 927 mm (36 in)**
W: 625 mm (24-5/8 in)
D: 1422 mm (56 in)
*NEMA output rating. **Height is 1029 mm (40-1/2 in) with muffler. ***Additional 136.5 kg (80.5 lb) with tank is full
Engine Brand
Deutz
F3L2011
HP
30.3
Type
Three-cylinder,
industrial,
liquid-cooled
diesel
Engine Speeds
Run: 1850 RPM
Fuel Capacity
43 L
(11.3 gal)
Automatic Engine Shutdown
Low Oil Pressure
High Oil Temperature
Oil Capacity
5.5 L
(6 qt)
Features
Tier 0, direct-injected, air/oil-cooled
engine. Right-side service access
with service intervals of 1000 hours
for oil and filters.