Mercedes-Benz 2005 E 320 - Manual (Page 131)

130
Controls in detail
Seats
Installing rear seat head restraints
̈ Insert head restraint and push it down
until it engages.
̈ Push button 1 and adjust head
restraint to desired position.
Drive- Dynamic seat* with multicon-
tour features
The Drive -Dynamic seat automatically ad-
justs the lateral support provided by the
backrest to your driving style.
The Drive -Dynamic seat electronically
controls the air pressure in the air cham-
bers of the backrest side bolsters. This
function improves driving comfort and
pleasure.
Additional the Drive-Dynamic seat has a
movable seat cushion and inflatable air
cushions built into the backrest to provide
additional lumbar and side support.
The seat cushion movement, backrest
cushion height and curvature can be con-
tinuously varied with switches on the right
side of the seat after turning the SmartKey
in the starter switch to position 2 or press-
ing the KEYLESS-GO* start/stop button
twice.
1 Backrest center
2 Backrest bottom
3 Seat cushion depth
4 Activate drive dynamic function
5 Backrest side bolsters
6 Massage function
̈ Switch on the ignition ( ୴ page 34).
!
When installing the head restraints,
make sure that:
ț The proper head restraint for each
seat is installed. The bars of the
head restraint designed for the mid-
dle rear seat are of even length and
shorter than those designed for use
on the outer rear seats.
ț The head restraints engage fully.