Mercedes-Benz 2005 E 320 - Manual (Page 140)

139
Controls in detail
Memory function
The memory button and stored position
button are located on the door.
M Memory button
1, 2, 3 Stored positions
̈ Switch on the ignition ( ୴ page 34).
or
̈ Open the respective door and insert
the SmartKey in the starter switch.
Storing positions in memory
̈ Adjust the seats, steering wheel and
exterior rear view mirrors to the de-
sired position (
୴ page 38).
̈ Press memory button M.
̈ Release memory button and press
stored position button 1, 2 or 3 within
three seconds.
All the settings are stored at the select-
ed position.
Recalling positions from memory
̈ Press and hold stored position
button 1, 2 or 3 until the seat, steering
wheel and exterior rear view mirrors
have completely moved to the stored
positions.
!
Do not operate the power seats using
the memory button if the seat backrest
is in an excessively reclined position.
Doing so could cause damage to front
or rear seats.
i
Releasing the stored position button
stops movement to the stored posi-
tions immediately.