Miele T8003 - Manual (Page 34)

Exhaust connection with a
flexible exhaust hose or rigid
pipe
Using the connector supplied, an
exhaust hose (4" [100 mm]
diameter) can be installed.
Necessary materials:
– a wall or window duct
(available from Miele)
– an exhaust hose made of approved
non-flammable material
^ Install the exhaust hose or pipe, 2 ,
with the connector, 1 , to the dryer.
Window connection
1 Window duct ( (installed in a
plexiglass pane)
2 Connector for the flexible exhaust hose
Wall connection with rigid pipe
1 Wall pipe (Installation sheet supplied
with the Miele wall pipe)
2 Connector
3 Rigid pipe
Installation
30