NEC LCD4000 - Manual (Page 21)

English-19
English
Basic Operation
Power ON and OFF Modes
The LCD monitor power indicator will turn green while powered on, or red when in off mode. The monitor can be powered on
or off using the following three options:
1. Pressing the power button.
Note: Before operating the remote control, be sure to turn
on the Main Power Switch on LCD monitor.
Main Power Switch
Power Switch
2. Using the remote control.
Note: Before operating the remote control, be sure to turn
on the Main Power Switch on the LCD monitor.
3. Pressing the Main Power Switch.
Note: When the Main Power Switch is used to power off
the LCD, the remote control and the power switch
will not activate the on mode. Be sure to turn the
Main Power Switch to the on mode before using
these two options.
REMOTE CONTROLLER RU-M104