Motorola 009 User Manual
Page 48
Using the RF Modem
48
Accompli 009 User’s Guide
C h a p t e r 3
To check your Accompli 009 modem settings on your PC:
1
On the Windows taskbar, click Start>Settings>Control Panel.
2
Double-click Modems.
3
On the Modem Properties dialog box, select the Accompli 009 modem, then click
Properties.
4
Make certain the maximum speed is set to 38400.
5
Click the Connection tab to verify the data bits, parity, and stop bits settings.
6
Click the Advanced button to verify the flow control settings.
7
Click OK to save any changes you make.
To change the RF Modem application settings on your device:
1
Select the RF Modem application from the Home screen.
2
On the toolbar, select the Settings button.
3
Select the appropriate settings in the spin boxes. The options and defaults are as
follows:
4
Select the Save button from the toolbar to save any changes you have made.
To access the RF Modem application:
1
Select the RF Modem application from the Home screen.
2
Select Connect from the toolbar.
3
To disconnect, select Disconnect from the toolbar.
To restore RF Modem default settings:
1
Select the RF Modem application from the Home screen.
2
On the toolbar, select the Settings button.
3
Select the Default button from the toolbar.
Connection Type
Cable
Bits per Second
38400 is recommended
Data Bits
8 (default) and 7
Parity
None (default), Even and Odd
Stop Bits
1 (default) and 2
Flow Control
None (default), Hardware, and Software
Accompli 009 User's Guide_.book Page 48 Wednesday, June 26, 2002 2:56 PM