Cleaning, E-57, Cleaning a soiled projector main unit – MITSUBISHI ELECTRIC XD60U User Manual

Page 58: Dirty lens, Dust of the intake and outflow holes, Cleaning the inside of the projector

Advertising
background image

E-57

Cleaning

• Be certain to disconnect the power plug from the power outlet before cleaning.
• Do not spray or otherwise expose the projector, lens, or screen to volatile substances such as insecticides. Do not leave rubber

or vinyl products in contact with the projector for long periods. Doing so could cause them to undergo qualitative changes or the
coatings may peel, etc.

Cleaning a Soiled Projector Main Unit

• Wipe with a lint-free, soft, dry cloth.

When very dirty, wipe with a cloth that has been moistened with a diluted neutral detergent, then finish with a dry cloth. If a
chemically-treated cloth is going to be used, please follow any written warnings.

• Do not wipe with thinner, benzene, or other solvents. Doing so could cause them to undergo qualitative changes or the coatings

may peel, etc.

• When removing the dust of the outflow and intake holes, use the brush attachment on a vacuum cleaner to clean out the dust.

Avoid using the vacuum directly without attaching the adapter as well as the use of a nozzle adapter.

• Do not scratch or otherwise hit the projector body with your nails or other hard object, since this will cause scratches.

Dirty Lens

• Clean using the same method you would use to clean a camera lens: Use a commercial blower for camera use or cleaning

paper for eye glasses. Be careful not to scratch the lens at this time.

Dust of the Intake and Outflow Holes

Dust that collects in the intake and outflow holes will obstruct the ventilation and cause the internal temperature to rise which
could cause damage. Clean this area carefully. As a guideline, clean at least every 100 hours of usage.

• Switch off the power, check that the STANDBY

indicator has changed to a steadily lit amber,
then unplug the power cable.

• Clean out the holes from the outside using a

vacuum cleaner. Use the brush adapter of the
vacuum cleaner to do this. Avoid using the
vacuum directly without attaching the adapter
as well as the use of a nozzle adapter.

Cleaning the Inside of the Projector

Cleaning of the inside of the projector is required about once a year. Failure to clean over a long period while dust has collected
inside the projector could cause a fire or breakdown. Do not clean the inside of the projector by yourself. Please be sure to contact
your dealer.

DV

I

AU

DIO

VID

EO

S-V

ID

EO

MO

US

E

ST

ATUS

SOURCE

ST

ANDBY

AUTO

MENU

QUICK

MENU

Advertising