Motorola MVME172P4 - Manual

TM
M V M E 1 7 2 P 4
V M E E m b e d d e d C o n t r o l l e r w i t h 4 I P S l o t s
♦ Choice of processors: 60 MHz MC68060
enhanced 32-bit microprocessor with
16KB of cache, and MMU and FPU; or 64
MHz MC68LC060 enhanced 32-bit
microprocessor with 16KB of cache and
MMU
♦ A32/D64 VMEbus master/slave interface
with system controller function
♦ 16MB of configurable SDRAM
♦ 512KB of SRAM with battery backup
♦ 2MB Flash memory for on-board monitor/
debugger or user-installed firmware
♦ 8K x 8 NVRAM and time-of-day clock with
battery backup
♦ Two serial communication ports, console
port as EIA-232-D DCE and second port
user configurable for EIA-232-D/EIA-422
(V.36) DTE/DCE
♦ Four 16- or two 32-bit IndustryPack ®
ports with one DMA channel per port
♦ Six 32-bit timers, one watchdog timer
♦ Optional SCSI and Ethernet interfaces
♦ One 32-pin JEDEC socket for EPROM
Four-slot IndustryPack logic interface for embedded monitoring and
control applications
The MVME172P4 allows VME embedded controller users to achieve the
price-performance value of RISC architectures while maintaining MC68000
object code compatibility. By combining the MC68060 superscalar perfor-
mance with a wide range of optional features and the IndustryPack interface,
OEMs can select the exact product for their application rather than paying for
unwanted features.
The inclusion of the new “Petra” application-specific integrated circuit (ASIC),
which replaces functions formerly implemented in the IP2 chip, MC2 chip,
and MCECC chip, improves the performance of the memory subsystem.
Memory configuration switches enable the customer to tailor memory size for
applications requiring smaller memory configurations.