Miele DA 3180 EN - Manual (Page 15)

Changing the light bulbs
,WARNING
TO REDUCE THE RISK OF
FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS,
OBSERVE THE FOLLOWING:
Before changing the light bulbs,
disconnect the hood from the power
supply, see "Important Safety
Instructions".
When in use halogen bulbs become
extremely hot, use caution. Do not
attempt to change the bulbs until
they have had sufficient time to cool.
Do not touch the bulb surface.
Fingerprints or body oils deposited
on the bulb will decrease its life.
Follow the bulb manufacturer’s
instructions.
^ Pull the deflector out and remove the
grease filter as described in
"Cleaning and Care - Grease filter".
^ Remove the active charcoal filter if
existent.
^ Reach through the grille opening and
push the light fixture downwards.
^ Turn the bulb counterclockwise and
pull it out of its socket.
^ Replace the bulb with a new one
(GU/GZ 10, 120V, 50W) in the
reverse order and push upwards.
^ Return the grease filter and if existent
the active charcoal filter.
Cleaning and care
15