Motorola V Series 120c - Manual (Page 83)

83
Security
Assigning a New Code or Password
Your phone’s four-digit unlock code is originally set to 1234, and
the six-digit security code is originally set to 000000 at the
factory. Your service provider may reset these numbers before
you receive your phone.
If your service provider has not reset these numbers, we
recommend that you change them to prevent other users from
accessing your personal information or modifying your phone
settings. The unlock code must contain four digits, and the
security code must contain six digits. Be sure to make a note of
the new numbers.
Locking and Unlocking Your Phone
You can lock your phone manually or set your phone to lock
automatically whenever you turn it off.
When you try to use a locked phone, it asks you to enter the
unlock code. A locked phone still rings or vibrates for incoming
calls or messages,
but you must unlock it to answer.
You can make emergency calls on your phone even when it is
locked. See “Dialing an Emergency Number When the Phone is
Locked” on page 28.
User.Guide.Tarpon.book Page 83 Thursday, April 26, 2001 2:23 PM