Mercedes-Benz 2001 CL 600 - Manual (Page 144)

141 Multifunction steering wheel, multifunction display
Technical
data
Instruments
and controls
Operation Driving
Instrument
cluster display
Practical hints Car care Index
1 Preliminary display of the individual settings
2 “SETTINGS” – the menu “INSTRUMENT CLUSTER”
can be called up in this option menu.
3 Selection marker
Pressing button
æ or ç on the multifunction
steering wheel controls the selection marker.
4 “TEMP. INDICATOR” – the unit set is displayed in
the outside temperature display, in the instrument
cluster and in the automatic air conditioner display.
5 “SPEEDOMETER” – the unit set is displayed in the
multifunction display
For setting clock, see separate COMAND
operator’s manual.
6 “TEXT” – sets the language used in the
multifunction display
7 Returning the setting menu “INSTRUMENT
CLUSTER” to the factory setting.
8 Acknowledgment
Press the è or ÿ button repeatedly until the
individual setting preliminary display (1) appears.
Press the j or k button until the setting menu
“SETTINGS” (2) is displayed.
Press button æ or ç until the menu
“INSTRUMENT CLUSTER” is selected by the selection
marker (3).
Press the j or k button until the required
display (4 to 6) is displayed. Pressing the æ or ç
button controls the selection marker. The settings made
are stored and applied immediately.
The individual setting preliminary display (1) will
appear again after you have run through all the setting
menus. Pressing the
è or ÿ button displays the
next or previous system.
To return menu “INSTRUMENT CLUSTER” (4 to 6) to
its factory setting:
• Call up menu (4 to 6).
• Press the J button in the instrument cluster for
approximately 3 seconds. Display (7) will appear.
• Press the J button once more. The menu
“INSTR. CLUSTER” is reset to factory settings,
acknowledged by display (8).
The individual setting display “SETTINGS” (2) will
appear if you do not press the
J button within
about 5 seconds. The setting menus will not be
reset.