Mercedes-Benz 2001 CL 600 - Manual (Page 146)

143 Multifunction steering wheel, multifunction display
Technical
data
Instruments
and controls
Operation Driving
Instrument
cluster display
Practical hints Car care Index
1 Preliminary display of the individual settings
2 “SETTINGS” – the menu “LIGHTING” can be called
up in this option menu.
3 Selection marker
Pressing button
æ or ç on the multifunction
steering wheel controls the selection marker.
4 “LIGHT CIRCUIT HEADLAMP MODE” 1 , see
page 157.
5 “LOCATOR LIGHTING”, see page 159.
6 “HEADLAMPS DELAYED SWITCH-OFF”, see “Night
security illumination” on page 158.
7 “INT. ILLUMINATION DELAYED SWITCH-OFF”, see
“Interior lighting” on page 184.
8 Returning the setting menu “LIGHTING” to the
factory setting.
9 Acknowledgment
1 Except Canada
Press the è or ÿ button repeatedly until the
individual setting preliminary display (1) appears.
Press the j or k button until the setting menu
“SETTINGS” (2) is displayed.
Press button æ or ç until the menu “LIGHTING”
is selected by the selection marker (3).
Press the j or k button until the required
display (4 to 7) is displayed. Pressing the æ or ç
button controls the selection marker. The settings made
are stored and applied immediately.
The individual setting preliminary display (1) will
appear again after you have run through all the setting
menus. Pressing the
è or ÿ button displays the
next or previous system.
To return menu “LIGHTING” (4 to 7) to its factory
setting:
• Call up menu (4 to 7).
• Press the
J button in the instrument cluster for
approximately 3 seconds. Display (8) will appear.
• Press the J button once more. The menu
“LIGHTING” is reset to factory settings,
acknowledged by display (9).
The individual setting display “SETTINGS” (2) will
appear if you do not press the
J button within
about 5 seconds. The setting menus will not be
reset.