Multiplex Technology 4CH H.264 User Manual
Page 17
13
Item
Description
HDD FULL
Select STOP to stop recording or OVERWRITE to reuse the HDD when
HDD is full.
[Stop]
：
Stop Recording
[Overwrite]
：
Start to overwrite beginning from the oldest data of HDD,
and continue to record.
OSD Position X
Set time stamp of OSD position X
OSD Position Y
Set time stamp of OSD position Y
OSD Position Setup
OSD position time stamp setup
Video Preservation (Hours)
Information stored within the HDD is preserved for only a specified length
of time.
Quality & Frame Rate
Setup…
Setup the quality and frame rate for each channel under normal
recording and event recording type.
4.2.1 Quality & Frame Rate Setup
Item
Description
View Normal / View Event
Setup resolution, quality and FPS separately for different record type.
No.
Check/ Uncheck the box will enable/ disable recording of that channel.
Resolution
Choose record resolution, this value will be used by each channel.
Quality
Choose from Below Basic / Basic/ Normal/ High/ Highest.
FPS
Choose recording frame rate (1~30).
Auto
The maximum recording frames available by the average distribution of
each channel.