Miele TOUCHTRONIC G 694 SC - Manual (Page 38)

Extended drying
If desired drying results are not consis-
tently achieved, the turbothermic cool-
ing fan can be programmed to run an
extra 14 minutes at the end of each
program.
The "Extended drying" feature can also
be activated to prevent condensation
from collecting on the steam deflector.
Turning extended drying on/off
^ Turn off the dishwasher.
^ Press and hold the "Top Solo" (20)
and "Start/Stop" (18) buttons. At the
same time turn the dishwasher on us-
ing the "On/Off" (13) button.
Release all buttons.
^ Press the "Top Solo" (20) button.
The "Salt" (15) indicator will flash and
the "End" (16) indicator will light.
If this is not the case, the above steps
must be repeated.
The extended drying time is off if the
Pots & Pans indicator flashes .
The extended drying time is on if the
Pots & Pans indicator is lit.
If the the correct drying time is set:
^ Turn off the dishwasher with the
"On/Off" button (13).
If the drying time is incorrect:
^ Press the "Top Solo" button (20).
^ Press the "Start/Stop" (18) button
twice.
^ The "Start/Stop" (18) indicator will
flash.
The changed extended drying option is
now stored.
^ Turn off the dishwasher.
Operation
38