MITSUBISHI ELECTRIC DX-PC25EA - Manual (Page 5)

- 5 -
1. Introduction
Mitsubishi DX-PC25EA is viewing software designed for DX-TL2530E or DX-NT430E Digital Video
Recorder (“DVR”). With this software, you can view surveillance pictures that are recorded on PC-
compatible media such as Compact Flash Card, CD-R/RW, and DVD.
In combination with DX-TL2530E or DX-NT430E digital recorder, you can set and operate the
recorder and load recorded pictures and the latest picture from the recorder using the communica-
tion function.
1.1 Product features
- Display of pictures from all the cameras connected with the DVR
- Playback of the data recorded in FSM2 format, and playback of the recorded data that are
copied to other media (within the range Microsoft Internet Explorer applies.)
- Playback of the data recorded on the SCSI copy media in FSMS2 format
- Display of the recording date and time, title, alarm type, and comment
- Comment search, date and time search, alarm index search, and alarm list display and search
- Zoom-in display of still picture
- Camera switching function, and multi-screen (16-split, 9-split, and 4-split) display function
- Printing by Windows-supported printer
- Bookmarking function, and A-B repeat playback function
- Audio playback function (except under certain conditions)
- Saving of still picture in bitmap or JPEG format, and conversion of still picture into AVI format
- Simultaneous playback during recording, latest picture loading, picture download by specifying
the section (via network)
- Remote control and remote setting of the digital recorder (via network)
- PTZ camera control (via network)
- Firmware updating function (via network)
- Alarm notification receiving function
1.2 System requirements
To use DX-PC25EA, you need:
- IBM PC/AT-compatible with Intel Pentium processor or Intel Celeron processor (500 MHz or
faster)
- Microsoft Windows 98SE, Windows Me, Windows 2000, or Windows XP
- RAM of 256 MB or more
- Video card and monitor with 1024 pixels by 768 lines (XGA) or more (recommended) and
32,000 colors for display
- Drive that can read CD-R discs
- Free hard disk space of 200 MB or more at the time of installation
- Free hard disk space for the swap depending on the swap size at the time of collective conversion
- SCSI adapter supporting WINASPI32 and SCSI-2 such as Adaptec AHA-2940 Series and
SlimSCSI (only when SCSI-connected peripheral devices are used.)
With Windows 2000 and Windows XP, WinASPI must be installed in advance for playback on
SCSI-connected devices. For installation of WinASPI, please read the instruction manual of
Adaptec SCSI board.
- Windows-supported sound adaptor such as SoundBlaster
- Microsoft Internet Explorer 5.01 Service Pack 2 or later (Prior installation is required.)
- NIC that operates correctly under the condition satisfying the above-mentioned requirements
(Required when the communication function is used.)