Motorola PRO ENCORE - Manual

13
A
User’s Guide

2
Introduction
Congratulations on your purchase of a Motorola
PRO ENCORE! pager. This compact pager uses many
advances in electronic and wireless technology which allow
you to receive numeric messages instantly and affordably.
Controls
Buttons
W On/Read/Select - turn pager on, read incoming
messages, and select the function displayed.
V Backlight/Reset - turn the display light on and reset
the pager to the standby screen, which shows time,
date, alarm status, and alert status.
Press V twice
to reset to the standby screen.
X Menu - scroll through the menu.
After performing any pager function described in this user’s
guide (setting the time, date, alarm, and so on), your
PRO ENCORE! pager automatically returns to the standby
screen and activates the selections you made.
Function Indicators
[ Silent Alert - the vibrator alerts without audible
alerts for incoming messages.
D Audible Alert - one of several pleasing audible alerts
sound for an incoming message.
\ Alarm - the alarm alerts you at the set time.
=
Message Protect - this message is protected
against deletion.
B Continuous Message - more message information
is on the next screen.
3
Turning Your Pager On
• Press W to turn your pager on.
Your pager gives an alert by either a sound or a vibration,
indicating that it is on. After displaying the power-up screen,
the time of day, the date, and an alert indicator are shown.
Receiving and Reading Messages
Your PRO ENCORE! pager can receive up to sixteen 20-
character messages. When a message is received, the
pager alerts for eight seconds.
• Press any button to stop the alert.
• Press W to display the message.
• Press V twice while reading your message to return to
the standby screen.
4
Receiving and Reading Messages (continued)
Messages longer than 12 characters display on a second
screen, indicated by the
B symbol. Press W to display the
second screen. The second screen displays automatically
after one minute, even if
W is not pressed.
The last screen of your message displays the message slot
number and the time received.
If a message is not read, the pager gives a reminder alert
every two minutes and the screen displays the number of
unread messages (i.e.,
1 page , 2 pages ) until all
messages are read.
If the pager receives more messages than its available
memory can hold, the new message replaces the oldest
read, unprotected message and
overflow displays on the
screen. After all read messages are replaced, a new
message replaces the oldest unread message. Replaced
messages are lost and not recoverable.