Philips Magnavox DVD/CD Player with Video Cassette Recorder DV220MW9 - Manual (Page 17)

PRECAUTIONS
PREPARATION
ADVANCED PLAYBACK
BASIC OPERATIONS
RECORDING
OPTIONAL SETTINGS
TROUBLESHOOTING
INFORMATION
EN EN 17
ADVANCED PLAYBACK
• To play back a double-digit track, press the track number
directly (e.g. for track 14, press [1], [4] and [OK]).
• To play back a triple-digit track, press the track number
directly for MP3. (e.g. for track 114, press [1], [1], [4] and
[OK]).
Note: • Depending on the DVD being played back,
this function can also be performed by directly
entering the desired chapter number with
[the Number buttons]. Refer to the manual
accompanying the disc.
• For DVD and audio CD, title, chapter or track
search is not available during programmed or
random playback.
Index Search
VHS VHS VHS VHS VHS Press
VCR
first.
1) Press [SEARCH] once.
2) Use [K] or [L] to select a desired index number.
3) Press [s] to fast rewinding or [B] to fast forwarding.
4) When the cassette tape has reached an index mark,
playback will start automatically.
Note: • The time gap between index marks must be more
than 1 minute for SP mode, 2 minutes for LP mode
and 3 minutes for SLP mode.
• The index search is not available during
recording.
• Press [STOP C] to stop the search.
• If a cassette tape ends during a search, the index
search will be canceled and the unit will rewind
to the beginning of the cassette tape.
Time Search
DVD-Video DVD-Video DVD-Video DVD-Video DVD-Video Audio CD Audio Audio CD CD Audio Audio CD CD Press
DVD
first.
1) Press [SEARCH].
2) Press [B] once to highlight when operating audio CD.
Press [B] twice to highlight when operating DVD.
01/01 002/021 --:--:-- OFF
3) Use [the Number buttons] to enter the desired time
within 5 seconds, then press [OK].
Playback will start automatically.
VHS VHS VHS VHS VHS Press
VCR
first.
1) Press [SEARCH] twice.
2) Use [K / L] to select a desired time. Then, press [B] to
fast forward, or press [s] to fast rewind. When the
cassette tape is reached to the selected time, playback
will start automatically.
Note: • For DVD, (e.g. to play time 0:15:00) press
[1], ]] [5], ]] [0], ]] [0] of ] [the Number buttons].
• For DVD and audio CD, press [CLEAR] to erase
the incorrect input at step 3.
• For VCR, press [STOP C] to stop the search.
• For VCR, if a cassette tape ends during a search,
the time search will be canceled and the unit will
rewind to the beginning of the cassette tape.
• The time search is not available for programmed
and random playback of a DVD or an audio CD
or during recording of the VCR.
Repeat Playback
Repeat function is available only during playback.
DVD-Video DVD-Video DVD-Video DVD-Video DVD-Video Audio CD Audio Audio CD CD Audio Audio CD CD MP3 MP3 MP3 MP3 MP3 Press
DVD
first.
1) During playback, press [REPEAT].
• Each time you press [REPEAT], repeat function
changes as below.
DVD-Video DVD-Video DVD-Video DVD-Video DVD-Video
OFF (repeat off)
CHAPTER (current chapter repeat)
TITLE (current title repeat)
Audio CD Audio Audio CD CD Audio Audio CD CD
OFF (repeat off)
TRACK (current track repeat)
ALL (entire disc repeat)
MP3 MP3 MP3 MP3 MP3
OFF (repeat off)
TRACK (current file repeat)
GROUP (current folder repeat)
ALL (entire disc repeat)
Note: • Repeat playback is not available with some discs
or during repeat A-B playback.
Repeat A-B Playback
DVD-Video DVD-Video DVD-Video DVD-Video DVD-Video Audio CD Audio Audio CD CD Audio Audio CD CD MP3 MP3 MP3 MP3 MP3 Press
DVD
first.
1) During playback, press [A-B] at your desired starting
point as point A.
2) Press [A-B] at your desired ending point as point B.
3) Press [A-B] to exit the sequence so that “OFF” appears.
Note: • Point B should be in the same title or track as
point A.
• To cancel point A, press [CLEAR] at step 1.
• Repeat A-B playback is not available with some
discs or during repeat playback.
Auto Repeat Playback
The unit will automatically rewind the cassette tape when it
has reached the end and will automatically start playback
unless you press
[STOP C] or you turn off the unit.
VHS VHS VHS VHS VHS Press
VCR
first.
1) In stop mode, press [SETUP].
2) Use [K] or [L] to select “AUTO REPEAT“.
3) Press
[ B] to “AUTO REPEAT” to set “ON” or “OFF”.
4) Press [SETUP] to exit.
Note: • The auto repeat can also be set to “ON” or “OFF”
by pressing [REPEAT] on the remote control.
• To cancel auto repeat, follow step 1 above.
Then, press [B [[ ] so that “OFF” appears beside ]
“AUTO REPEAT”. Press [SETUP] to exit.
• The auto repeat playback will start
automatically if you select “AUTO REPEAT” to
“ON” in the stop mode.