Basic connections (continued), Projector + computer – MITSUBISHI ELECTRIC XD210U User Manual
Page 11
EN-11
ENGLIS
H
Basic connections (continued)
Projector + Computer
For computer with Mini D-SUB
For analog connection:
1.
Connect one end of the supplied RGB cable to the COMPUTER IN terminal of the projector.
2.
Connect the other end of the RGB cable to the monitor port of the computer.
Important:
•
When you use a longer RGB cable instead of the provided cable, the image may not be projected correctly.
•
Some computers require additional connectors or analog RGB output adapters to be connected with this projector. Contact your dealer for fur-
ther information.
•
This projector uses stereo pin jack for its audio input. Check the type of the audio output terminal of the connected computer and prepare a
proper cable for connection. Some computers don’t have the audio output terminal.
•
Speaker output is mono.
For Macintosh
•
Some Macintoshes require a MAC adapter for the RGB cable for connection with this projector. Contact your dealer for further information.
AUDIO OUT
MONITOR OUTPUT
COMPUTER IN
RGB cable for PC
Necessary when outputting to both
a PC monitor and the projector.
PC audio cable (option)
AUDIO IN
to PC audio output
Computer
to monitor port