Monarch Instrument 9876 - Manual (Page 2)

©2007 Paxar Americas, Inc. All rights reserved. BC-SP-013 Rev. 04-08
800.543.6650 prompt 5
937.865.2554 fax
www.paxar.com
Monarch
®
9876
™
MWS
™
(Mobile Work Station)
PERFORMANCE
AC Power Sources:
Pure-Sine Wave Inverter
24 VDC / 300W / 115VAC
Continuous Output: 300W
Surge (3 seconds): 400W
Built-in GFCI Duplex Outlet
UL / TUV/ CE Listed
DC Power -
85 hours battery duration in "typical" conditions
AC/DC Power Supports full AC power with support for DC-powered 98X5CR Series printer on same MWS.
Cycle Use:
100% depth of discharge, approx. 250 cycles
50% depth of discharge, approx. 550 cycles
30% depth of discharge, approx 1200 cycles
Cycle life is approximate and many factors affect individual batteries performance
SPECIAL CONSIDERATIONS
• The MWS is designed for 9825CR and 9855CR (Cart-Ready) DC-powered printers. Note: Complete printer
specification can be found on 9825 and 9855 printer pages.
• 938™ Verifier and 926™ Knife are not supported with Cart-Ready printers.
• Addition of other peripheral devices will decrease runtime time between battery charges.
OPTIONS
• 24 VDC (with M098X5CR harness)
• 24 VDC / 300W / 115 VAC Pure Sine Wave Inverter
• 24 VDC (Symbol or Intermec Terminal Harness)
• 24 VDC w/ DC / DC converter (24V to 12V)
• Auxiliary Shelf (1 or 2)
• Table Top 20" x 26" x 1" (508mm x 660mm x 25mm)
• Mid-Shelf Enclosure
• File Pockets
• Rubber Mats
In our ongoing effort to deliver the best technology, specifications are subject
to change without notice.