Motorola S803 - Manual (Page 17)

Using the phone 17
3. Using the phone
3.1 Calls
3.1.1 Make a call
1. Press < or J .
2. Enter the phone number (maximum 32 digits). If you
make a mistake, press M to delete a digit.
3.1.2 Predial
1. Enter the phone number (maximum 32 digits). If you
make a mistake, press M to delete a digit.
2. Press < or J to dial the phone number entered.
3.1.3 Dial one touch numbers 1 to 9
1. Press and hold a key from 1 to 9 until the number
is displayed and dialed.
NOTE
You need to set the one touch number first.
- If no number is stored, you hear a beep.
3.1.4 Call from the phonebook
1. Press . . The first entry in the phonebook is displayed.
2. Scroll , to the entry you want.
3. Press < or J to dial the number.
TIPS
Instead of scrolling to browse the phonebook entries, press
the numeric key corresponding to the first letter of the entry
you wish to locate. For example, pressing
2 will show the
entries starting with A. Pressing 2 again will show the
entries starting with B, etc.
3.1.5 Call from the calls list
NOTE
You need to subscribe to your network's Caller ID service to
be able to see the caller's number in the calls list. See
section “5. Caller ID” for more details.
1. Press
/ . The first entry in the calls list is displayed.
2. Scroll , to the entry you want.
3. Press < or J to dial the number.
3.1.6 Call from the redial list
The last five numbers called are saved and can be redialed later.
1. Press
- . The first entry in the redial list is displayed.
2. Scroll , to the entry you want.
3. Press < or J to dial the number.