Motorola S803 - Manual (Page 29)

Using your Answering Machine 29
3. Press P and , to the flash time you want. (8 options
are available: 90 , 100 , 110 , 250 , 300 , 400 , 600 and 700ms )
4. Press P to save.
7.3 Set the Area Code
1. Press P and , to select Setup Base .
2. Press P and , to select Area Code .
3. Press P and enter the area code (3-digit only). Press
M to delete a digit.
4. Press P to save.
7.4 Reset All Settings
All personalized settings will be reset to default. Phonebook
entries, calls list and redial list will remain unchanged.
1. Press
P and , to select Reset Settings .
2. Press P and , to select All Settings .
3. Press P to select Yes .
4. Press P to reset all settings to default.
8. Using your Answering Machine
The answering machine records unanswered calls when it is
activated. It can store up to 59 messages within the
maximum recording time of 15 minutes (including the pre-
recorded voice menu and outgoing announcements). Each
message can be up to 4 minutes long. Your personal
outgoing announcements can be up to 1.5 minutes long.
8.1 Play Messages
Through the base:
1. Press
s .
2. The new messages are played from the loudspeaker on
the base in the sequence they are recorded.
3. Press h to increase or decrease the volume during
message playback respectively.
4. During message playback, press the keys below to
perform the following functions:
s Press to stop playing messages or resume
playback.