Telephone menu, Menu, Distance to empty – Mercedes-Benz 2011 SL-Class User Manual

Page 131: Controls in detail, Control system

Advertising
background image

Distance to empty

X

Press button U or V repeatedly until
the first function of the

Trip computer

menu appears in the multifunction display.

X

Press button & or * repeatedly until
the message

Range: appears in the left

multifunction display.
The calculated remaining driving range
based on the current fuel tank level
appears in the right multifunction display.
If only very little fuel is left in the tank, a
vehicle at the fuel pump C appears
instead of the remaining driving range.

Telephone menu

G

Warning!

A driver’s attention to the road must always
be his/her primary focus when driving. For
your safety and the safety of others, we
recommend that you pull over to a safe
location and stop before placing or taking a
telephone call. If you choose to use the
telephone while driving, please use the hands-
free device and only use the telephone when
weather, road and traffic conditions permit.
Some jurisdictions prohibit the driver from
using a mobile phone while driving a vehicle.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximately
14 m) every second.

You can connect your telephone to the
COMAND system via Bluetooth

®

, see

separate COMAND system operating
instructions.

X

Switch on the COMAND system.
Refer to separate COMAND system
operating instructions.

X

Press button U or V repeatedly until
the message

TEL appears in the left

multifunction display.
One of the following messages will appear
in the multifunction display:

R

No Service: No network is available.

R

Bluetooth Ready: The telephone has
not been connected to the COMAND
system via Bluetooth

®

yet.

X

Connect the telephone to the
COMAND system via Bluetooth

®

.

R

Ready or name of the network provider
(if available): The telephone has found a
network and is ready for use. You can
operate it using the control system.

Answering a call

When your telephone is ready to receive calls,
you can answer a call at any time. In the right
multifunction display you will then see the
following message, or if available, the caller
ID (number or name):

X

Press button 6.
You have answered the call.

Ending a call or rejecting an incoming

call

X

Press button ~.

Control system

129

Controls in detail

230_AKB; 6; 22, en-US
d2ureepe,

Version: 2.11.8.1

2009-07-28T18:49:58+02:00 - Seite 129

Z

Advertising