Motorola WN825 - Manual (Page 41)

Section 3 Configuration
3-26 WN825
Advanced Configuration of the Wireless Network Adapter
You can configure advanced features from this screen. Primarily you are concerned with
the IBSS Channel Number, Location, and Frame Bursting areas.
1 Click Start, click Settings, and then click Control Panel.
2 Click System and select the Hardware tab.
3 Click Device Manager.
4 Click Network adapters.
5 Click Motorola Wireless Network Adapter WN825 and select the Advanced tab. An
example of the Advanced tab is shown below (your screen may differ slightly):
6 To change the value for any of the listed properties, click the Property.
7 Change the value in the Value box by either clicking the Value arrow and selecting a
new value, or by typing a new value, as appropriate.
The default values for these properties are set for maximum performance.