Miele 38ACR User Manual

Miele Kiln

Advertising
background image

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE

1

FIREPLACE KITS

AND ACCESSORIES

INSTALLATION INSTRUCTIONS FOR ABF GLASS DOOR/END PANEL PACKAGED SET

MODELS 38ACR AND 38ACR-BB

GLASS DOOR/END PANEL

904665
REV. C 03/2008

Lennox's Glass Door/End Panel Packaged Set, Models 38ACR and
38ACR-BB, are designed to be installed on the CR-3835R/L Series
fireplaces. These kits come complete with all of the required hardware
necessary to complete the task.

Please read and understand these instructions carefully before begin-
ning installation and operation. Do not attempt to alter or modify the
construction of these glass door assemblies as it could cause a malfunc-
tion or possible fire hazard.

The Models 38ACR and 38ACR-BB have been tested and listed by Omni
Test Laboratories, Inc.

PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE.

GENERAL INFORMATION

Before starting the installation of the glass doors and end panel, assure
the kit is complete and undamaged. Refer to

Figure 1 and the inventory

list to identify all necessary parts.

INVENTORY LIST

A. (1) Top Channel (door)

F. (1) Glass End Panel

B. (1) Bottom Channel (door)

G. Door Panel Assembly LH

C. (1) Top Channel (panel)

H. Door Panel Assembly RH

D. (1) Bottom Channel (panel)

J. (2) Baffles

E.(1) Corner Post

K. Hardware Kit (Including
Handles) Installation Instructions

Figure 1

END PANEL INSTALLATION STEPS

Step 1. Remove the screen rod covers from the front and corner
openings. Remove two angle retainers and replace screws.

Note: Units are shipped without covers installed.

Step 2. Refer to

Figure 2 and remove the top two outer screws and loosen

the bottom screws at least two (2) turns. Remove corner shipping post,
if installed.

CAUTION: REMOVE THE PLASTIC PROTECTIVE COATING FROM ALL
BRASS PIECES BEFORE INSTALLATION.

J

B

A

H

G

E

C

D

F

K

US

Advertising