Mustek PP7000-II - Manual (Page 21)

it back to position when finish. The lock up of the print hood can
then be released after this problem solved.
Please use manual cutter as temporary alternative measure
once the auto cutter malfunctioned.
Turn the wheel downward till a hole in
the plastic gear appears in this window
Lift transparent
protective foil
Open Cutter Cover
when hood locked
5. Advanced Analysis Tool
This printer supports Hexadecimal Dump for experienced
user to view exactly what data is received by the printer. This can
be useful in finding software problems.
To start the dump mode: Turn off printer; Open print hood;
Hold down FEED button while turning printer on; Close the hood.
To stop the dump mode: Press the FEED button to print out
the last line; Turn off the printer.
During dump mode: All commands except DLE EOT and
DLE ENQ are disabled.
3 - 5