Motorola Memo Express 6881018B45-B - Manual

Me
mo
Memo
INTRODUCTION
Congratulations on your purchase of a Motorola Memo
EXPRESS alphanumeric pager. This compact
pager incorporates many advances in electronic, mi-
crominiaturization and wireless technology. The
Memo EXPRESS pager allows you to receive alphanu-
meric messages (words and numbers) instantly and
affordably.
This user’s guide explains how to operate your pager,
and provides suggestions for first-time as well as expe-
rienced pager users. Familiarity with the user’s guide
assures you get the most from your
Memo EXPRESS
pager. Keep it handy for quick reference.
OPERATING YOUR Memo EXPRESS PAGER
When someone needs to contact you, a call to your
paging service or phone generates a radio signal that
sends messages directly to your
Memo EXPRESS
pager. This signal carries alpha and numeric informa-
tion that can only be received when your pager is on.
ACTIVATION
Paging service providers require certain procedures in
order to activate your new
Memo EXPRESS pager.
Contact your provider to begin paging service.
2
CONTROLS
Read
9
- used to turn the pager on and to display
messages
Mode
7
- used to scan pager modes
Select
3
- used to select pager functions
After performing any pager functions described in this
manual (setting the time, date, alarm, etc.), your
Memo
EXPRESS pager automatically returns to the standby
mode and your selections are activated. Or press Read
9
to return to the standby mode and activate your
selections.
INDICATORS
Ä
- audible mode
[
- vibrate (silent) mode
,
- chirp mode
©
- message indicator
À - the current message slot
ë - locked message
û - reading a locked message
å - message continuation indicator
 - pager alarm activated
ú - out-of-range indicator
ö - automatic turn on/off feature activated
ó - low-battery indicator
Memo
3
TURNING YOUR PAGER ON AND OFF
• Press Read
9
to turn your pager on. An alert indica-
tor in the upper left-hand corner indicates that the
pager is on and ready to receive messages.
When the pager is on and no activity is taking place, the
standby screen is displayed. The standby screen looks
like this:
• To turn your pager off, press Mode
7
until TURN
PAGER OFF? is displayed.
• Press Select
3
.
The time of day and the date are still displayed on your
pager even when it is off.
SETTING THE CLOCK AND THE DATE
1. Press Mode
7
until SET TIME? is displayed.
2. Press Select
3
. The hour digits begin to flash.
3. Press Mode
7
repeatedly to set the correct hour
digits.
4. Press Select
3
. The minute digits begin to flash.
5. Press Mode
7
repeatedly to set the correct min-
utes.
Set-time screen example
Example of a standby screen
4