Moxa Technologies NPORT 5430I - Manual

Serial Device Server Solutions
S
erial D
evic
e S
er
ver S
olutions
e-mail: [email protected] www.moxa.com
2-8
Total Solution for Industrial Device Networking
S
erial D
evic
e S
er
ver S
olutions
e-mail: [email protected] www.moxa.com
2-9
NPort 5410, 5430, 5430 I
Features
World’s First LCM Display Serial Device Server
• Easy-to-use LCM (Liquid Crystal Module) interface for setting
up IP address
• Auto-detecting 10/100 Mbps Ethernet
• 4 ports with RS-232 or RS-422/485 interface
• Surge protection for all serial signals (15 KV ESD)
• Supports TCP Server, TCP Client, UDP, and Real COM Modes
• Supports web, telnet, console
• Supports SNMP MIB-II for network management
• NPort 5430I has 2 KV isolation protection
The NPort 5400 series provides a convenient and transparent
way to connect serial devices to an Ethernet, with basic
configuration all that’s needed to network your existing
serial devices. Protect your current hardware investment,
but also ensure future network expandability. Moreover, the NPort 5400 series can transparently transmit data bi-direc-
tionally between the serial and Ethernet interfaces. You can
simultaneously centralize your serial device management
and distribute management hosts over the network.
Make Up to 4 RS-232 or RS-422/485
Serial Devices Internet Ready
The built-in LCM human-machine interface displays all con-
figuration parameters, and includes 4 buttons for inputting
data, or for selecting the operation mode, making it easy
to set up server parameters, including IP address, netmask, and gateway address. Furthermore, you can also monitor
server status and data transmission, eliminating the need
to prepare additional PCs during installation.
Easy-to-use Serial Device Server
The NPort 5400 series works like an add-on multiport
serial board to the Windows host, but with one major
advantage—the TCP/IP network.
With NPort’s Real COM/TTY drivers, the serial ports on NPort
5400 series products are recognized as Real COM ports by the Windows operating system, or Real TTY ports by Linux
environments. Basic transmit/receive data functions are
provided, as well as RTS, CTS, DTR, DSR, and DCD (input)
control signals.
Real COM/TTY Port
Versatile operation is ensured since different modes can be
used for different serial ports. NPort 5400 Series products are
suitable for connnecting different devices for remote data
polling, event handling, or data multicasting via the TCP/IP network. For example, you can configure NPort 5400’s port
1 for driver mode, port 2 for TCP server mode, and ports 3
and 4 for TCP client mode.
4 Independent Serial Ports Can be Configured
for Different Operation Modes
NPort 5410
NPort 5430
5410,
5430,
5430I