Fx routing, The plug-in configuration window, D8b manual • appendices • page 155 – MACKIE Digital 8Bus D8B v5.1 User Manual

Page 161

Advertising
background image

D8B Manual • Appendices • page 155

FX Routing

The Plug-in Configuration Window

Card Slot Column

Card B

Card C

Card A

Plug-in
display toggle

Input Source
Assignment
Column

Plug-in
Assignment
Column

Close Window

Destination
Assignment
Column

Inserting a Plug-in into a Channel

A pre- or post-DSP channel insert can also be

used as the input source for a plug-in. When a
channel insert point is selected, the plug-in output
returns to the channel by default. The FX return
path is disconnected, although the plug-in output
is still displayed on the FX return channel meter.

A plug-in channel insert assignment can be

made from the Plugin Configuration window, or
from a pull-down menu from the mixer screen.

Plug-in Configuration Window

Pre-DSP Pull-down

Post-DSP Pull-down

This assignment can also be made from the

control surface and VFD by holding the desired
channel’s SELECT button for two seconds, then
paging over to Plug Pre or Plug Post, selecting
the input source, then selecting the desired plug-
in slot from the follow-on menu.

Card D

Stereo/Mono
Mode Column

Stereo/Mono
Toggle Button

Advertising