Marley Engineered Products 898L - Manual

READ AND SAVE THESE INSTRUCTIONS.
MODEL 898L
VENTILATOR
GENERAL
Model 898L gives automatic through-the-wall ventilation. It allows placement of the ventilator over the
kitchen range and is operated by a wall switch away from the cooking area. Care must be taken at all times
in handling the motor blade assembly, so as to avoid bending the blades.
Model 898L is used for installation in frame houses.
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK
OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
1. Do not use this fan with any Solid-State speed control
device.
2. Use this unit only in the manner intended by the manufacturer.
If you have questions, contact the manufacturer.
3. Before servicing or cleaning unit, switch power off at
service panel and lock service panel to prevent power from
being switched on accidentally.
4. Installation work and electrical wiring must be done by
qualified person(s) in accordance with all applicable codes
and standards, including fire-rated construction.
5. Sufficient air is needed for proper combustion and exhaust-
ing of gases through flue (chimney) of fuel burning equip-
ment to prevent back drafting. Following the heating equip-
ment manufacturer’s guideline and safety standards such
as those published by the National Fire Protection
Association (NFPA), and the American Society for Heating
Refrigeration and Air Conditioning Engineers (ASHRAE),
and the local code authorities.
6. When cutting or drilling into wall or ceiling, do not damage
electrical wiring or other hidden utilities.
7. CAUTION: For General Ventilating Use Only! Do not use to
exhaust hazardous or explosive materials and vapors.
8. CAUTION: To reduce the risk of fire and to properly
exhaust air, be sure to duct air outside. DO NOT vent
exhaust air into spaces within walls, ceilings, attics,
crawl spaces or garages. DO NOT install sleeve or duct
in a fire rated wall.
Dimensions
1”
12”
4”
9”
10 5 ⁄
8
”
9 7 ⁄
8
”
11 1 ⁄
4
”
Fig. 1