Mocomtech CDM-570 - Manual (Page 155)

CDM-570/570L Satellite Modem with Optional IP Module Revision 4
Front Panel Operation MN/CDM570L.IOM
6–31
Select Length or Line Code using the ◄ ► arrow keys, then press
ENTER
If Line-Code is selected, the following sub-menu will be
displayed:
Select On or Off using the ◄ ► arrow keys, then press
ENTER.
If Length is selected, the following sub-menu will be displayed:
Edit the line length using the ▲ ▼ arrow keys, then press
ENTER. Values will toggle between the following values:
0-133, 133-266, 266-399, 399-533 and 533-655 feet.
If either E1-Bal or E1-Unbal is selected, the following sub-menu will be
displayed:
Select On or Off using the ◄ ► arrow keys, then press ENTER.
If the optional IP module is installed, and IP is selected by pressing ENTER, all
of the rear-panel electrical interfaces are disabled, and all data for Tx and Rx is
routed to and from the modem board to the IP module. The user is returned to the
previous menu level.
T1 Line Code (B8ZS):
On Off(AMI) (
◄ ►,ENTER)
T1 Line Length:
000-133 feet (
▲ ▼,ENTER)
E1 Line Code (HDB3):
On Off (
◄ ►,ENTER)