Mocomtech CDM-570 - Manual (Page 169)

CDM-570/570L Satellite Modem with Optional IP Module Revision 4
Front Panel Operation MN/CDM570L.IOM
6–45
6.14.3 (MONIT) EVENT-LOG (STORED EVENTS)
If the user selects Stored Events, the following sub-menu is displayed:
Select View or Clear-All, using the ◄ ► arrow keys, then press ENTER.
(MON, EVENTS) VIEW
If the user selects View, the following screen is displayed:
The user may scroll backwards or forwards through the entries in the event log,
using the
▲ ▼ arrow keys. Pressing ENTER or CLEAR will take the user back
to the previous menu. The event log can store up to 255 events. When a fault
condition occurs, it is time-stamped and put into the log. Similarly, when the
fault condition clears, this is also recorded, as shown below:
If the user selects Clear-All, the following screen is displayed:
If the user selects Yes, the event log is cleared, and the user is taken directly back
to the previous menu. However, if there are faults present on the unit at this time,
they will be re-time-stamped, and new log entries will be generated.
Note that in accordance with international convention, the date is shown in
DAY-MONTH-YEAR format.
Stored Events: View
Clear-All (
◄ ►,ENTER)
Log240:30/11/97 10:37:35
Clear - Demod Lock (
▲ ▼)
Clear all Stored Events?
No Yes (
▲ ▼, ENTER)
Log23: 30/11/02 10:37:32
Fault - Demod Lock (
▲ ▼)
IMPORTANT