Mocomtech CDM-570 - Manual (Page 18)

Page 14 of 54 MN/CDM570L.AA4
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Header
Compression
Refresh rate –
UDP HRU= 3 bytes Command or Query.
Header compression refresh rate, 1 to 600
Resolution=1 packet
Refresh rate for UDP only stream.
Example: HRU =50
Restrictions: 570 only HRU =
HRU!
HRU? HRU =xxx
(see description of
arguments)
Header
Compression
Refresh rate –
All Others HRA= 3 bytes Command or Query.
Header compression refresh rate, 1 to 600
Resolution=1 packet
Refresh rate for all other streams.
Example: HRU =50
Restrictions: 570 only HRA =
HRA!
HRA? HRA =xxx
(see description of
arguments)
Payload
Compression
Refresh rate PRA= 3 bytes Command or Query.
Payload compression refresh rate, 1 to 600
Resolution=1 packet
Refresh rate for all other streams.
Example: PRU =50
Restrictions: 570 only
PRA =
PRA!
PRA? PRA =xxx
(see description of
arguments)
Telnet timeout TET= 2 bytes Command or Query.
Telnet log in timeout, 1 to 60
Resolution=1 minute
Inactivity timeout on cli menu screen.
Example: <1/TET=50
TET =
TET!
TET? TET =xx
(see description of
arguments)
Administrator
UserName ADU=
11 bytes
No spaces
allowed. Command or Query.
Change the administrator username, where:
Example: ADU=comtech
To get the new user name effective, ADP must be issued
Immediately after ADU. Then query ADU? to see the new.
ADU =
ADU!
ADU?
ADU =xxxxxxxxxxx
(see description of
arguments)