Mocomtech CDM-570 - Manual (Page 20)

Page 14 of 54 MN/CDM570L.AA4
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
IGMP
enable/disable IGE= 1 byte, value
of 0 or 1 Command or Query
where,
0=Disabled
1= Enabled
Enables or disables the IGMP feature.
IGE =
IGE!
IGE? IGE =x
(see description of
arguments)
Access List
Enforcement ACE= 1 byte, value
of 0 or 1 Command or Query
where,
0=Disabled
1= Enabled
Enables or disabled access list enforcement.
ACE =
ACE!
ACE? ACE =x
(see description of
arguments)
Ping Reply
Enabled PRE= 1 byte, value
of 0 or 1 Command or Query where,
0=Disabled
1= Enabled
Enables or disables ping reply. When disabled, the modem will not
respond to pings (network security feature)
PRE =
PRE!
PRE? PRE =x
(see description of
arguments)
Telnet Enabled TLE= 1 byte, value
of 0 or 1 Command or Query where,
0=Disabled
1= Enabled
Enables or disables the telnet interface. When disabled, the user
will not be able to log in to the telnet interface.
TLE =
TLE!
TLE? TLE =x
(see description of
arguments)
SNMP
Enabled SPE= 1 byte, value
of 0 or 1 Command or Query where,
0=Disabled
1= Enabled
Enables or disables the snmp interface. When disabled, the user
will not be able to use the snmp interface. SPE =
SPE!
SPE? SPE =x
(see description of
arguments)
Downlink
Route All
Multicast DRM= 1 byte, 0 or 1 Command or Query where,
0=Disabled
1=Enabled
Enable/Disable Downlink Route All Multicast option. DRM=
DRM! DRM? DRM=x
x – 0 or 1.