Mocomtech CDM-570 - Manual (Page 253)

CDM-570/570L Satellite Modem with Optional IP Module Revision 4
Serial Remote Control MN/CDM570L.IOM
13–19
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Configuration
Save CST= 1 byte Command only.
Causes the CDM570L to store the current modem configuration in
Configuration Memory location defined by the one-byte argument
(0 to 9).
Example: CST=4 (store the current configuration in location 4)
CST=
CST?
CST*
CST# N/A N/A
Configuration
Load CLD= 1 byte Command only.
Causes the CDM570L to retrieve a previously stored modem
configuration from Configuration Memory location defined by the
one-byte argument (0 to 9).
Example: CLD=4 (retrieve modem configuration from
location 4) CLD=
CLD?
CLD*
CLD# N/A N/A
ReCenter
Buffer RCB= None Command only.
Forces the software to recenter the receive Plesiochronous/Doppler
buffer.
Note: This command takes no arguments.
Example: RCB=
RCB=
RCB?
RCB*
RCB# N/A N/A
RTC Date DAY= 6 bytes Command or Query.
A date in the form ddmmyy, where
dd = day of the month (01 to 31),
mm = month (01 to 12)
yy = year (00 to 99)
Example: DAY=240457 (April 24, 2057) DAY=
DAY?
DAY*
DAY# DAY? DAY=ddmmyy
(see description of
arguments)
RTC Time TIM= 6 bytes Command or Query.
A time in the form hhmmss, indicating the time from midnight,
where:
hh = hours (00 to 23)
mm = minutes (00 to 59)
ss = seconds (00 to 59)
Example: TIM=231259 (23 hours:12 minutes:59 seconds) TIM=
TIM?
TIM*
TIM# TIM? TIM=hhmmss
(see description of
arguments)