Mocomtech CDM-570 - Manual (Page 27)

Page 15 of 54 MN/CDM570L.AA4 23
3.4.3 QoS Commands
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
QoS mode QSM= 1 byte, value
of 1, 2 or 3. Command or Query.
QoS operating mode, where:
1=Priority/Max
2=Min/Max
3=DiffServ
Example: <1/QSM=2
QSM =
QSM!
QSM? QSM =x
(see description of
arguments)
DiffServ Rule DSR= 48 bytes,
numerical Command:
The value in this is broken into separate values:
Read/Get Format:
cccc|ddd ddd|mmmmm|MMMMM|p
cccc – DiffServ class name
ddd ddd – DiffServ Code Point. The code point has 0, 1, X
mmmmm – Minimum bandwidth in kbps.
Range = 0..99999 (kbps)
MMMMM – Maximum bandwidth in kbps.
Range = 0..99999 (kbps)
p – priority is fixed and assigned by system.
User is allowed to modify Assured Class Rules 9, 10, 11, 12
ONLY, while the QoS [QSM=3] is in DiffServ mode.
Write/Set Format:
Example: DSR[9]=00100|00400
Sets min bw to 100, max bw to 400.
To set DSR, the system has to be set in DiffServ mode by issuing
<1/QSM=3.
DSR=
DSR!
DSR? DSR =x [1..48]
(m = Min value,
M = Max Value)