Mocomtech CDM-570 - Manual (Page 32)

Page 14 of 54 MN/CDM570L.AA4
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Delete an ARP
entry ARD= ARD=xxx.xxx
.xxx.xxx Command Only.
Delete the ARP entry associated with the specified IP Address.
xxx.xxx.xxx.xxx IP address of ARP entry to delete.
Example: <1/ARD=192.168.001.100
ARD =
ARD!
N/A ARD=xxx.xxx.xxx.xxx
(see description of
arguments)
IGMP Server:
IGMP Query
Period IGQ= IGQ=xxx
Where xxx is 1
to 600 Command or Query
Set the IGMP Query period in seconds while modem acting as
IGMP Server.
IGQ=
IGQ! IGQ?
IGQ=xxx
xxx – value of 1 to 600.
IGMP Server:
IGMP Max
Resp. Time IMR= IMR=xxx
Where xxx is
value of 1 to
598 Command or Query
Set the Maximum response time for the IGMP Query in seconds.
Should always be 2 less than query period. The range is 1 to (IGQ
– 2). If IGQ is at 30, then IMR can be set from 1 through 28.
IMR=
IMR! IMR?
IMR=xxx
xxx - value of 1 to 598.
IGMP Server:
Number of
Missed
Responses INM= 2 bytes,
Numerical
1..30 Command or Query.
Number of missed responses before leaving the IGMP Group.
Configured from 1…30
Example: INM=15
INM =
INM!
INM?
INM =xxx
(see description of
arguments)
IGMP Client
Recognize
Queries IRQ= 1 byte, 0 or 1 Command or Query
where,
0=No
1= Yes
Enable/Disable Recognizing IGMP Queries.
Example: IRQ=0
IRQ =
IRQ!
IRQ?
IRQ =xxx
(see description of
arguments)
IGMP
Client Router
Alert Option
for V1 IRO= 1 byte, 0 or 1 Command or Query
where,
0=No
1= Yes
Enable/Disable Router Alert option for V1 Reports.
Example: IRO =0 IRO =
IRO!
IRO?
IRO =xxx
(see description of
arguments)