3 receiver hdlc addresses page – Mocomtech CDM-570 User Manual

Page 324

Advertising
background image

CDM-570/570L Satellite Modem with Optional IP Module

Revision 4

IP Module - CLI and Telnet Operation

MN/CDM570L.IOM

17.2.2.3 Receiver

HDLC Addresses Page

The Receiver HDLC Addresses page is activated from the Satellite/HDLC Interface page.
This page allows the user to define up to four HDLC addresses that can carry user
information on the Satellite Interface.


The Satellite/HDLC Interface page contains the following options/fields:

Menu Options/Fields

Entry

Description

HDLC Addr 1 - 4

1 - 4

HDLC address in hex <1 - FFFE, enter = 0001>

Note: HDLC addresses are not used in Point-To-

Point Mode.

Small Network Mode (up to 254 addresses) - The user
is limited to valid addresses between the values of
0x01 and 0xFE.

Large Network Mode (up to 32766 addresses) - The
user is limited to valid addresses between the values of
0x0001 and 0x7FFF.

Delete HDLC Addr

D

Enter the HDLC entry to delete <1...4>

Save Parameters

S

This option allows a user to save the current
configuration to permanent storage. This configuration
will be restored on each successive power cycle.

Exit

X

This option allows a user to exit the current menu and
return to its parent menu.

17–24

Advertising
This manual is related to the following products: