Mocomtech CDM-570 - Manual (Page 358)

CDM-570/570L Satellite Modem with Optional IP Module Revision 4
IP Module - CLI and Telnet Operation MN/CDM570L.IOM
Menu Options/Fields Entry Description
Upgrade To U Determines which installed software package that the IP
M odule or base modem firmware will overwrite when
upgrading with a new software package. The possible
options are:
0. Oldest – overwrite the oldest software package based
upon date.
1. Image1 – overwrite the software package loaded into
the first slot in permanent storage.
2. Image2 – overwrite the software package loaded into
the second slot in permanent storage.
Codecast Multicast Address M Multicast address used by Vload to upgrade the modem
firmware and param file via streaming multicast. Must
match the address specified in Vload.
PARAM Image C Identifies the PARAM file that will be loaded on bootup.
The options are:
1. Last saved Parameter file
2. Factory – uses the internal, hard-coded factory
default parameters.
Activates Statistics Menu page. Statistics T
Activates Event Log page. Event Log E
Activates Database Operations page. Database Operations D
Reset R Allows user to reboot the modem (includes the IP
modem and base modem). It has the same logical effect
of power-cycling the unit.
Activates Diagnostics page. Diagnostics G
Save Parameters S This option allows a user to save the current
configuration to permanent storage. This configuration
will be restored on each successive power cycle.
Exit X This option allows a user to exit the current menu and
return to its parent menu.
17–58