Mocomtech CDM-570 - Manual (Page 367)

CDM-570/570L Satellite Modem with Optional IP Module Revision 4
IP Module - CLI and Telnet Operation MN/CDM570L.IOM
Menu Options/Fields Entry Description
Tx DMA Underrun Error
Count Number of frames not transmitted or re-transmitted due
to transmit DMA underrun.
Tx Lost Carrier Sense
Count Number of frames transmitted by device despite the fact
that it detected a deassertion of carrier sense.
Tx Deferred Count Number of frames deferred before transmission due to
activity on link.
Tx Single Collision Count Number of transmitted frames that encountered only one
collision.
Tx Multiple Collision Count Number of transmitted frames that encountered more
than one collision.
Tx Total Collision Count Total number of collisions encountered while attempting
to transmit.
Rx Bytes Number of bytes received by this Ethernet interface.
Rx Good Frames Count of good frames received by the Ethernet device.
Rx CRC Error Frame
Count Number of aligned frames discarded due to a CRC error.
Rx Alignment Error Count Number of frames that are both misaligned and contain a
CRC error.
Rx Resource Error Count Count of good frames discarded due to unavailable
resources.
Rx FIFO Overrun Error
Count Number of good frames discarded due to overflow of
internal receive FIFO.
Rx Collision Detect Error
Count (CDT) Number of frames encountered collisions during frame
reception.
Rx Runt Frames Count Count of undersize frames received by the Ethernet
device.
Tx Flow Control Pause
Frames Transmitted Number of Flow Control frames transmitted by the
device.
Rx Flow Control Pause
Frames Received Number of Flow Control frames received by the device.
CLEAR C Resets all Ethernet Statistics
Save Parameters S This option allows a user to save the current
configuration to permanent storage. This configuration
will be restored on each successive power cycle.
Exit X This option allows a user to exit the current menu and
return to its parent menu.
17–67