Mocomtech CDM-570 - Manual (Page 376)

CDM-570/570L Satellite Modem with Optional IP Module Revision 4
IP Module - CLI and Telnet Operation MN/CDM570L.IOM
Menu Options/Fields Entry Description
Dump Packets received
from Ethernet Interface V Toggles [Yes] and [No]
Executing this menu option forces the IP M odule to
dump a hexadecimal representation of each packet that
it receives from the Ethernet Interface.
Dump Packets received by
Router B Toggle [Yes] and [No]
Executing this menu option forces the IP M odule to
dump a hexadecimal representation of each packet that
is received by the routing engine. (Note: Does not apply
when in easyConnect
™ mode.)
Dump Packets sent to
EndStation G Toggle [Yes] and [No]
Executing this menu option forces the IP M odule to
dump a hexadecimal representation of each packet that
is received by and destined for this modem. This traffic
would include Pings, SNMP, Telnet, HTTP, and FTP
types of traffic.
Dump Packets received
from EndStation H Toggle [Yes] and [No]
Executing this menu option forces the IP M odule to
dump a hexadecimal representation of each packet that
is sourced from this modem and destined for some other
device. This allows a user to see what type of packets
this modem is generating internally.
Ping P Enter the ip address in aaa.bbb.ccc.ddd format
Traceroute A Enter the ip address in aaa.bbb.ccc.ddd format
Command Line Debug
Prompt D Enter the password to access the debug command line.
Note: This is reserved for Customer Service and
engineering use.
Save Parameters S This option allows a user to save the current
configuration to permanent storage. This configuration
will be restored on each successive power cycle.
Exit X This option allows a user to exit the current menu and
return to its parent menu.
17–76